|
|
Build Your Online Product Catalogs?
The line consists of pre-heating oven, power roller, inbox 90ooverturning machine, two-way delivery unit, forming fixture, auto-injection unit, out-box lift translation machine, out water heat unit, pneumatic unit, electric control unit and etc.
It adopts linear layout, the fixture outer mould plate is heated by circulating water heating system controlled by a mould temp-controller. The fixture can block injection hole automatically and function of pumping core automatically. The mould changing adopts link gear or cylinder driving mechanism with manual control and electric control self-locking. It can be applied to different dimension products.
Elegant appearance, co***ct structure, less environmental pollution, small labor intensity, high efficiency, various co***tibility, etc.
Dimension: L:800-2000mm; W:450-1000mm; D:450-1000mm
Curing time: Adjustable within 999s
Curing temperature: 35-70℃
Working stations: 6¡ª8
Injection mode: Horizontal injection by single head from the side of the line
Foaming medium: POL(Cycle pentane 0r 141b) +ISO
Cycle time: About 50~60s/pcs (depend on the curing time and fixture quantity)
Product model: Able to process 6~8 different products at the same time
Fixture driven mode: Driven by electric motor
Voltage: 380V/50Hz
Total Power: Max:¨Q190KW, Control cabinet power:24V
Compressed air supply: Working pressure: ¨R0.5*** Air consumption:0.1m3/min
|
| Company: |
Chuzhou Zhongluo Equipment and Mould Manufacture Co.,Ltd.
|
| Contact: |
Mr. Henry Zeng |
| Address: |
Chuzhou Industrial Zone, Chuzhou, Anhui, China 239064 |
| Postcode: |
239000 |
| Tel: |
86 550 3039586 |
| Fax: |
86 550 5499669 |
| E-mail: |
|
|
|
|
Home
